Share

by Dr Dennis Van Puyvelde, Head of Gas, Energy Networks Australia

The development of a domestic and export hydrogen market in Australia is a key focus of the Federal Government’s Low Emissions Technology Statement. One of the challenges of decarbonising gas is how large volumes of alternatives like hydrogen can be stored to provide the same level of energy security.

One of the main advantages of gas infrastructure is its ability to store vast amounts of energy. Australia has developed 275PJ of natural gas storage, which represents more than the combined annual gas consumption for households and businesses.

This storage helps balance the daily supply of natural gas with fluctuating demand throughout the day, and more importantly, allows seasonal variations in heating demand to be met. This storage is the equivalent of almost six billion household batteries, or around 240 batteries for each Australian.

That’s a lot of energy storage. As we transition to hydrogen, it is important to understand how much storage capacity would be needed to provide the same level of energy security and whether geological storage can be used.

A joint project between Future Fuels CRC (FFCRC) and CSIRO completed an assessment of underground hydrogen storage (UHS) opportunities in Australia. The aim of the assessment was to estimate the scale of the potential underground storage capacity of hydrogen in sites that are broadly suitable – but not to rank sites from worst to best, which would require further work.

The scale of the storage challenges helps paint the picture. A total storage capacity of just over 600PJ (about five million tonnes) was estimated. This was made up of 300PJ for supporting the gas/hydrogen network, 300PJ to support hydrogen exports and between 1.3 and 1.6PJ3 of hydrogen to support the electricity network if hydrogen is used instead of batteries and/or pumped hydro.

The four main geological storage options for UHS are salt caverns, depleted oil and gas reservoirs, aquifers, and hard rock caverns.

Depleted gas reservoirs and saline aquifers are geologically similar.

Salt caverns

Salt caverns can be created in various ways within salt domes or salt deposits by leaching out large cavities through the injection of water. The salt surrounding the cavern is of very low permeability and a very effective barrier to gas leakage.

Europe has an abundance of salt deposits, so it has focused on using salt caverns as an option for UHS. Salt caverns are already used for storing hydrogen for the petrochemical industry.

Depleted oil and gas reservoirs

Depleted gas fields have been the preferred options for underground storage of natural gas. These fields are easy to develop and can utilise existing infrastructure (e.g. wells, pipelines). They have also demonstrated containment as they have trapped natural gas over long periods of time.

Like gas storage, UHS requires a site with adequate storage capacity, injectivity, and safe containment in the form of an impermeable caprock. Repurposing existing gas storage sites to hydrogen will require assessments of the characteristics and may also require some modification of infrastructure.

Saline aquifers

In regions where the above formations are not available, saline aquifers can be developed for gas storage. The formation should have similar properties as depleted gas reservoirs, such as requiring a trapping structure and having adequate storage capacity and permeability to be able to inject and withdraw hydrogen.

Hard rock caverns

Abandoned mines have been canvassed as an option for UHS. These hard rock areas occur in places where there are no depleted gas fields or saline aquifers. Compressed air storage and CO2 storage have also been proposed for abandoned mines but to date, there are no examples of UHS in these mines. New engineered caverns can also be built instead of repurposing abandoned mines.

Figure 1: Underground hydrogen storage opportunities in Australia (Source: FFCRC RP1.1-04).

Storage potential

The total estimated storage potential in depleted gas fields is 37,996PJ. This is a high-level estimate but not a geological assessment.

Converting this to actual storage projects will require more detailed assessments to determine the social or environmental acceptability, the specific location of the sites, and much more detailed site assessment and characterisation work.

The key outcome from this initial assessment is that the scale of prospective storage is much higher than the potential demand for UHS of 600PJ. So only a few sites would be needed in each region.

A qualitative assessment of storage potential for saline aquifers and hard rock caverns was also completed. As shown in figure 1 and figure 2, there are suitable options across all areas in Australia.

Economics of UHS

UHS is expected to be the most cost-effective option when the volumes of hydrogen that need to be accommodated are large. The cost estimates can vary considerably depending on the type of storage, the size of the storage option, its location, and the level of utilisation.

Future work

The project provided a high-level estimate of the storage potential of UHS. The main finding is that the potential for storage is higher than the potential demand for storage for meeting seasonal gas/hydrogen demand and hydrogen exports.

Implementing UHS in Australian salt caverns requires:

» A more detailed mapping and characterisation of known salt deposits

» Exploration for new salt deposits

» UHS pilot/demonstration in Australian salt caverns

Figure 2: Suitability of UHS options across Australia (Source: FFCRC RP1.1-04. Red indicates no suitable options in that basin, yellow indicates possible options and green indicates suitable options).

For gas fields, the actual capacity, or dynamic storage capacity, would need to be confirmed, initially through reservoir simulations, but ultimately by performing pilot hydrogen injection and production experiments. Specifical aspects to be tested include:

» Amount of cushion gas needed, mixing with residual hydrocarbons

» Interaction of hydrogen with seal – capillary pressure (containment), diffusion, reaction

» Interaction of hydrogen with reservoir – relative permeability, wettability, geochemistry

The capacity to store energy is an essential component of a decarbonised economy to support variable renewable electricity. It is also an important component of a hydrogen export market for Australia to be able to safely store hydrogen. Once again, Australia’s unique geography can give it an edge.

Note: This article was originally published on the Energy Networks Australia website.

Related articles
0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*

©2022 Energy Magazine. All rights reserved

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

Forgot your details?